Doosan Excavator Swing Motor in Corpus Christi - With one of the widest options in the industry, you can be confident to find the parts you need to have to get you back in business fairly quickly. We have built our worldwide status thru tremendous customer care.
Forklifts are really versatile equipment. A range of different accessories can be fitted onto the machinery in order to increase their capabilities and expand the jobs they are regularly able to finish. Some of the major different forklift accessories and components are described below.
Fork Extensions
Fork extensions are designed to fit over the forklift's standard forks. These forks could can be changed entirely, or various parts could be added to them so the truck could lift various kinds of cargo including baskets, rollers, telescopic loads, among others.
Forklift Seals and Bearings
The bearings and seals on the forklift allow the inner workings on the machinery to operate efficiently and optimally. Bearings enable two moving parts of the machinery to smoothly work together, without any friction. If not fitted properly, seals and bearings can sometimes break and wear down and these components may need to be replaced periodically. If a bearing is the proper type of bearing for the equipment and it is fitted properly, this particular forklift component can easily outlive the life expectancy of the entire equipment.
Cabs
The cab part of the forklift truck is the section where the operator sits and controls the whole equipment. Depending on the particular unit, the cab can be open or it could have a roof. On a work place, this forklift component typically has a roof to minimize the risk of falling materials and comply with safety reasons.
Brake Forklift Parts
The brakes located on a forklift truck are required to be frequently checked in order to make sure that they are in safe working condition. Normally, these components should be replaced due to extended wear or damage.
Wheels and Tires
The wheels and the tires are the forklift parts which are most normally damaged. Problems occur due to slashes from rough and uneven floor boards and punctures from sharp things on the floor.
These rugged forklifts are run by Nissan industrial engines. Better horsepower and greater torque satisfy a range of warehouse, manufacturing and recycling operations as well as other outdoor/indoor situations.
The forklifts manufactured by Nissan are available in liquid propane or LP, or Dual Fuel with gas/LP. These machinery also come with a fuel management system that provides great fuel efficiency and reduced NOx, HC and CO exhaust emissions. Each compact model is available with the standard comprehensive engine protection system. This system is in place so as to warn operators in the event of of a severe drop in oil pressure or any excessive heat. This particular system offers extended drive train life and engine life for your lift truck investment.
Operator Control and Comfort
Made with a big operator compartment, there is enough foot, head and leg room which could be set up for a range of different sized drivers. The forklift offers a standard full suspension seat that has soft touch arm pads and hip resistant to provide utmost operator comfort and enhanced safety. The low profile design of the model offers a lot of head clearance. There is also a front to back travel adjustment to enable a customized fit so as to accommodate practically any operator height.
The K-series engine made by Nissan provides the same bottom by-pass colling system and block design that is customary on the predecessor H-series. These new and improved engines are specifically tested and engineered for industrial applications in order to provide all of the torque and power, in the low rpm range, to meet the needs of the application.
An extra safety measure which is added for your investment, the K21engine has a transmission/engine warning system and protection so as to decrease the speed in the event of low oil pressure or excessive heat generation.
