Caterpillar Bulldozer Ripper Cylinder in Corpus Christi - Our company offers overnight delivery on all parts and attachments for Doosan, Hyundai, Samsung, Kobelco, and a wide selection of other recognized brands. We have access to scores of businesses around the entire world and can certainly supply all of your used and new equipment requirements.
Inspect a Forklift
There are over 10,000 workplace injuries related to fork lifts happen each year, according to HRSDC and OSHA report. A lot of these accidents are caused by operator error. Lack of proper equipment inspection and maintenance causes many others. Maintenance and operation of a forklift is not only the reason for personal injuries, but also of damage to property. Forklifts could damage sprinklers, building structures and overhead pipes, and other machinery when incorrectly operated. The following daily check ups should be done in order to lessen the chance of forklift accidents.
Turn the engine off prior to checking different fluid levels: engine oil, fuel, hydraulic oil, coolant and brake fluid. The tires should be inspected for indications of wear and tear. Check the air pressure in the tires. Check the forks' condition. The load backrest must be attached tightly. Do a visual check of the top-clip retaining heel and pin. Afterward carry out an inspection of the hydraulic hoses, mast chains, stops and cables. Make sure that the overhead and finger guards are securely attached.
The LP powered forklift has propane tanks that have to be checked for corrosion, damage or rust. The battery's charge and electrolyte levels have to be tested every so often. Seat belts need to be checked for wear and tear. Check to make sure the owner's handbook is stored on-board the forklift in a storage compartment. Test the seat belt to make sure the latches are secure. Check the hood latch to ensure it is working as it should.
Start the forklift and listen to the engine noise to make certain there are no unusual sounds. If there are, investigate immediately. Check the steering controls and the accelerator. The parking break and the service break should be working correctly.
The tilt control and drive control must be inspected to ensure proper functioning in both forward and reverse. Check the functioning of the hoist and lowering control, and the attachment control. Test the horn and lights. Then check the wipers, heater and defroster to make sure they are functioning smoothly. Check each gauge to find out that it is reading within functional limits.
How to Replace Forklift Tires
Forklift maintenance includes regularly checking the tires. This also includes replacing damaged or worn tires. Various kinds of forklifts are intended to be utilized with specific types of tires: pneumatic, polyurethane or solid. Tire types differ depending on factors like duration and frequency of use, the weight of the load and ground surfaces. In order to change a forklift tire you would require the following tools: tire press, spare tires and forklift jack. Replacing your forklift tires periodically is vital to help prolong the equipment's lifespan.
Instructions
1 Methodically inspect the tires for signs of wear and damage. Make sure that the type of tire on the forklift is the correct type. If the wear on the tire exceeds 40 percent, the tire must be replaced.
2 Purchase replacement tires.
3 Position the jack under the tire and lift the forklift to a height which enables you to remove the tire easily.
4 To be able to separate the tire from the rim, use the tire press and remove the old tire. Replace the tire with the new one and secure tightly. Lower the forklift, and afterward move the jack to the next damaged tire and do the same thing.
5 A damaged tire can be fixed on site by a local repair company. If this is your first call, the repair company may provide a free estimate. If the tires are very large, you will need a stationary tire press. In that case, you must take out the tire and bring it to a repair shop.
